Our Inventory along with Instruction Manuals

Be sure to check out the "Coming Soon" page!  We will be offering some new products very soon!

IMG_0365_edited.jpg

EZ Balancer II

  • Aircraft grade aluminum.

  • Adjustable to 18" widths between cradles.

  • Stock Height from the bottom of the bases to the top of the cradles is 17.375". Height can be increased with the addition of the Super Size kit. (See the Hints Section for additional advice.)

  • Anti-rotation pins to prevent the aircraft from falling off the cradles....allows  true one person use

  • As an added bonus, we now install these pins at the factory for you!

  • Handles models from 8lbs to AMA/IMAA weight limits.

  • Designed for 1/4 scale and larger models.

  • All hardware included.

  • Perfect for RC aircraft and also, UAV/UAS Industry!

  • 100% Made In America!

  • Patent pending

EZ Balancer Lite

  • Aircraft grade aluminum.

  • Handles models up to 20lbs!

  • 10" width between cradles!

  • 11.25" height from the bottom of the  base to the top of the cradles in stock form! (See the HINTS section for ideas of how to raise the height.)

  • Includes the cradle limiters to prevent the aircraft from falling from the balancer and true one person balancing!

  • As a bonus, these pins are factory installed for you!

  • All hardware included.

  • Perfect for all aircraft in the weight limits including UAV/UAS industries!

  • 100% Made in America!

  • Patent pending

Edited_CUB.png
SUPERSIZEKIT1.JPG.w560h420.jpg

EZ Balancer II Super Size kit

  • Made from 1/4" aircraft grade aluminum!

  • Allows an additional 4 1/2" of height!

  • Powder coated to match the EZ Balancer II.

  • All hardware included.

  • Allows extended landing gear, drop tanks, belly tanks, camera and equipment pods.

  • 100% Made in America!

  • Patent pending

EZ Locks - Large

  • Perfect for controlling your servo wires, fuel and air lines, ignition wires, etc.

  • Protects and keeps them under control and out of harms way.

  • 30 to a pack!

  • For 1/4" lines.

  • Bend the lock to open the slot, insert wire, tube, etc., into the lock, release and CA to the inside of the aircraft.

  • Works on both wood and composite!

  • See the Hints page for additional use!

  • 100% Made in America!

  • Patent pending

Clamplocks.JPG.w560h747.jpg
IMG_2657.JPG

EZ Locks - Assorted

  • Perfect for controlling your servo wires, fuel and air lines, ignition wires, etc.

  • Protects and keeps them under control and out of harms way.

  • 30 to a pack!

  • For 1/4" lines to antenna size holes which are great for longer satellite receiver runs!

  • Bend the lock to open the slot, insert wire, tube, etc., into the lock, release and CA to the inside of the aircraft.

  • Works on both wood and composite

  • See the Hints page for additional use!

  • 100% Made in America!

  • Packaging removed for picture clarity

  • Patent pending

Replacement Rubber Guards for the EZ Balancer II balancer

Lost your guards for your EZ Balancer II? Here's a factory new, complete set of the guards that came with your balancer. Includes the 4 Base Guards and 4 Cradle Guards.....Shipped Free!

IMG_2876_edited.jpg
IMG_2875_edited.jpg

Replacement Rubber Guards for your EZ Balancer Lite Balancer

Lost the rubber guards to your EZ Balancer Lite? Here's a full set of the 4 factory new rubber guards that came with your EZ Balancer Lite...Shipped Free!

EZ Balancer II HD Extended Cross Braces

  • If your standard cross brace width is too narrow for your models, this is what you need!

  • Made from 3/16" 6061 powder coated aluminum that matches your EZ Balancer II balancer!

  • Adjustable from 17" out to 32"

  • Fits 1/3rd to 1/5th and many more wide body models!

EZBII with HD Cross Braces2_edited.jpg